Jump to content

Parting out my '87 CR-X Si swapped- race car

Recommended Posts

Hi all,


Updated- 9/18 9:00pm
I am parting out my '87 CR-X Si race car. It has a d15b 3 stage VTEC in it.
Some things people have asked me about, but I have not sold any of it yet. Here is what I have to sell-
For use with a stock Gen1-
Rear hatch frame with no glass
1 NIB MOOG rear hub/bearing
1 or 2 NIB front wheel bearings
Spare left and right door
Spare left and right Si lower rocker panels
3 or 4 spare plastic door panels below guard
Skinned passenger door on car is good
A sunroof cover that was bonded and riveted to the roof to cover the sunroof hole. (Probably can come off)
KYB Excel front shocks
Rear sway bar
Front sway bar
I also have a lot of generic racing stuff and everything you need to do an engine swap to a D15b 3 stage VTEC OBD2 or 1 if you want to.
ATL 15ga fuel cell SP115-LS-C with ST528 surge tank 1yr old (SOLD)
Spare new engine, trans, ECU and harness (never installed) From JDM Engine Depot- $1100
Engine in car from Tennessee JDM- $500
D16z6 Trans w/ MFactory helical LSD (no grinding or popping out of gear) Mint - $900
4-2-1 Header- $150 or w/ engine package
Hasport engine mounts
Hasport hydro to cable
Hasport custom left side axle
Custom shift linkage
Plate oil cooler
-10 AN lines to cooler
1 Fr set Hawk Blue HB218E.583
2 NIB Centric Rotors (Pads and rotors are for a '95 Civic DX)
Filter relocator (Aluminum welded AN in and out- instead of o-rings) NO LEAKING!
Autometer Fuel gauge- $450 for set of 3 with 5v sending units
Water temp gauge w/ sender #4355
Oil temp gauge w/ sender #4356
Oil pressure w/ sender #4353
Autometer fuel level gauge- #4314 $40
5 Switch panel with push button starter- $45
P28 Hondata S300v3 (PENDING)
Custom brake pedal lever (for heel toe shifting)
5lb Stroud pull cable, 2 nozzle- Fire suppression system
Moroso battery box relocation- $50
3qt Moroso Accumulator- $150
16” Kirkey drag seat seat (modified, comfortable) $100
HRX 350mm suede steering wheel (new this season) (SOLD)
Grant 3 to 5 bolt adapter plate for wheel (SOLD)
Quickcar Angled Window net that has straps on bottom to mount to cage $40
Longacre 17" convex mirror and brackets #22531- $40
2- Walbro 255LPH fuel pumps (PENDING)
Pressure relieving Vent valve (prevents spillage on overfill and cornering) (SOLD)
6AN inline fuel filter
Advanti DST Storm S1 15x7 wheels- 6 for racing (scuffed up) with 13 Dunlop Direzza ZIII and some Zll spares. There are enough tires to do an endurance race and some spares. 205/50/15 (9 good tires) $600 total
I am working on pricing. Let me know what you are looking for. And feel free to PM me an offer.
Edited by djsteviec
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...