Jump to content

AP Racing Rotors

Recommended Posts

That's an interesting kit.  Just to clarify, those are either 299mm (11.75") or 310mm (12.19") discs.  On the outer face edge (looking down the veins), you'll see a part number stamped into it.  CP3862-10#GA (#=4/5 is 299, 5/6 is 310).  IMO, looking at the pads (overhang ridge), I'd say you have 299mm, but it was probably designed for the 310mm.  Both have the same mounting pattern.  Might be something the buyer should consider.


GLWS.  Its a good deal, the iron alone retails for $190+/side now.

Edited by Bremsen
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...