trigun7469 56 Report post Posted February 12 (edited) SOLD!!!! Edited 3 hours ago by trigun7469 Share this post Link to post Share on other sites
Bremsen 1,638 Report post Posted February 14 (edited) That's an interesting kit. Just to clarify, those are either 299mm (11.75") or 310mm (12.19") discs. On the outer face edge (looking down the veins), you'll see a part number stamped into it. CP3862-10#GA (#=4/5 is 299, 5/6 is 310). IMO, looking at the pads (overhang ridge), I'd say you have 299mm, but it was probably designed for the 310mm. Both have the same mounting pattern. Might be something the buyer should consider. GLWS. Its a good deal, the iron alone retails for $190+/side now. Edited February 14 by Bremsen Share this post Link to post Share on other sites
