Jump to content

Wing Mounting


IPF Racing
 Share

Recommended Posts

So we had a 69in wing that was endplate mounted back to the body last year. I had big spreader plates (hidden under the vinyl) stitch welded to the body, but after 2ish races and a bunch of track days it was pretty flimsy and had cracked through the body. On the new build I'm trying to get some reinforcement ideas. Whats everyone using to support their wings on the backside of the body?

 

I'm considering just some tubes from the spreader plate to the frame rail, but curious to see what other are doing. 

 

Last years setup:

CbWVfFztM4z7mkKTObD5S16noG_J69vFbylWP-HnaJ2J8iptZUvsTBLELYgdsEuRbbT_xb8fIikWwfkfifR3XraaJ9HN2tao7GM1p09VO-eXFmcCyVngNscvxDnyDA_He53fB5tfNGvuPt-TxGDX757XdypofdLBeUSM4Smo_yZ6qIotYUo7S8p4zchQTALfnT17tOt1BNoOTWvFfzO-Pmf6d4zsKDkERBf661b8I4ZCLYTixBPg2EPIKq0jV8WzKUxfXoq4Dcu7Pl3BEkj02nSts9rV81UmsOH3dJMKcdf0NDgr4ciQoaqArpOIK2werfHnDcKUrMOE5gFSkD5J9duV8EV2NEry_vnd-UJvNqUqdc2xUypMiliWtG0hZwiTI_Box8o36EZkpn_Yjzg9sHhJn0Pxz6xqFGGizTf0bTBeFRo_4zc8SvoQNKnFNa8fRd99ROaHKIjCYUxHtJleFtbZopHfIwX_5v1Mql_GjYF9I3dOa7T2tVXC-grN9fvwR_v2ptZBJMk8txcKWBTRNyYcG1Nb2QKmK24XbyoPto7axwIzNTfDTUaDWvBkAzFioLhCVTOgEsfZkxNB-f3D2PZiEh1a317CJJBRJJyS8zb6ZbKTpNNeAxil0BlnLeuMJX730Lr_1VpGK3i25VpeoCkrKRT92XvM=w678-h903-no

 

Current location thoughts:

Chkg2bU7pmmDhXrTBT1SJR9WwejWn9ndG6yDCkQJbrD4pm6pcm0JuS9OCAuwgBaNmk4fxfeuo41TSpvDadw3DY8wRIyKvk8-YkH5VXU-WR86VhxNLDAxbgtgAzF0YZp5s5OF8DoRreb94RKUDpb7h37wDDIMzJMiqNM5pC_n7kGlszVl9z9P824EgOE2gDMj_HIrYxhTh64iALE3l4gAvZo8PmXT_yNQO0Y0Mam75kDqwfL9WFpDowzyYVhXHUb3E6Aa5CjNGbbvYIWEJ-Ea1NwcahDQreKpjUkN4XE3Om7GYPfd0-oIJEK7EW3lfmIJYg5k-5f-Q4slQ2e3hgEsbwErU9NfFwFyeXjYFBR9btYOU4_ByHSiU5-uFyxNHZVU8MHQiojYKbAQz5iRPW9c6yrrD4Mk0yiN7P9zds8ZrvY3SJwLE0vk-XM1PUvjXWMgMZB6dtIodGIZEJlLw7VUoO063UCf8UHkam2SxWvnesB1VUTvoKkxDLjtBQDIv2zBZFHef50Ofbe8_3FQjqX486_xSEI3jHL1TgfB-fYr26Vmh3vPuD0GZ7WmSl2VYjbXuKWvxlKi70hMCqJImfunk0DrQ2O_8WVvFq8MQcnFIkxYRQojloxWLWOuk0Um84wxWUbvrZpZb3h3IF1TcXFVlgoX3JRyZQwp=w1735-h904-no

Link to comment
Share on other sites

On ‎3‎/‎1‎/‎2019 at 1:29 PM, Wink said:

Ours is bolted through the quarter panel on top of the drip rail

 

 

Where are you guys at on the fender rule?  Have you tech'd and passed?  I've got 15x9 Storm S1's with 225's and they look pretty similar.

 

Wing looks great btw.

 

Link to comment
Share on other sites

16 hours ago, ETR said:

 

Where are you guys at on the fender rule?  Have you tech'd and passed?  I've got 15x9 Storm S1's with 225's and they look pretty similar.

 

Wing looks great btw.

 

Haven't been through this year. We podiumed last fall at an event Ray attended. He said our rears should be good. We did some work on the front over the winter (mainly cause I'm a ricer at heart) should be good to go. 

Airdam.JPG

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...