wvumtnbkr Posted December 18, 2021 Report Share Posted December 18, 2021 (edited) So, I built this car over the last 1.5 years. Finished 9th, 2nd, 1st in the last couple of races. 1989 rx7 with a gm 3.5 liter 60 degree v6 making about 185rwhp. T5 wc Trans out of a 2000 camaro v6. No adapter needed. 1995 s10 cylinder clutch (exedy). 2.5 inch Coilovers on bilstein struts. 2 sets of 15 x10 wheels with very serviceable 245 rs4 tires. Hawk blue brake pads in front. Hp+, pro 5.0 pads, black pads for the rear. Wingman aero rear Wing. Center net, drivers window net. Racecapture pro mk3 with telemetry and Kindle dashboard with oil pressure, oil temp, water temp, and new innovative o2 sensors. No power steering, it's fine. I did 4 hours out of 7 at barber last weekend. Huge steering wheel. Like a 380mm omp with an nrs quick release. Omp champ 1 seat. Cage has passed tech with strut reinforcements in the front. Stock rear-end 4.1 ratio. Lots of spare axles (never used). No spare engine or Trans or rear. Lots of other spares. Plywood splitter and roll plastic airdam. Any questions answered. Come with steel open deck trailer and all spares. Comes with 4 hunsaker fuel jugs and about 6 vp racing jugs. comes with 3 digital motorola type radios from sampson racing. They are awesome! Car is 499 points. Update: needs a head gasket! Updated price $12k I will give you all info and parts specs. Trailer and some parts are negotiable if you want to split up the package. Edited July 13 by wvumtnbkr 1 Quote Link to comment Share on other sites More sharing options...
Ronh911 Posted December 18, 2021 Report Share Posted December 18, 2021 Very fast car with lots of fuel. GLWS Rob 1 1 Quote Link to comment Share on other sites More sharing options...
Fitsbain Posted December 21, 2021 Report Share Posted December 21, 2021 you have a new project? Quote Link to comment Share on other sites More sharing options...
wvumtnbkr Posted December 21, 2021 Author Report Share Posted December 21, 2021 3 hours ago, Fitsbain said: you have a new project? My 3900 swapped rx8 fun car (not a champcar). In fact, I am sitting at the driveshaft shop right now getting one made for it. Quote Link to comment Share on other sites More sharing options...
wvumtnbkr Posted December 22, 2021 Author Report Share Posted December 22, 2021 Any questions? Price out of line? I'm really torn about this car. It's awesome, drives well, is raw enough to be crazy fun. Mostly reliable (all issues are addressed fully!). However, ot takes time away from the family. I want to finish my project car and get my garage and yard space back (yard is where the trailer is that comes with it). Quote Link to comment Share on other sites More sharing options...
jwilless Posted December 22, 2021 Report Share Posted December 22, 2021 Can you detail the vpi total for this car along with the stock vs swap hp? What does it weigh? Quote Link to comment Share on other sites More sharing options...
wvumtnbkr Posted December 23, 2021 Author Report Share Posted December 23, 2021 (edited) 13 hours ago, jwilless said: Can you detail the vpi total for this car along with the stock vs swap hp? What does it weigh? I can. I'll post the tech sheet when I'm near a computer. Stock hp doesn't matter, but this gen rx7 is about 160 hp at the crank. The engine swapped in is an 3.5 liter gm v6 (like that found in pontiac g6). They make 200 or 201 hp. The swap calculator spits out 52 pts iirc. Airdam 10 pts Splitter 10 pts Height adjustable spring perches and springs 40 pts (all 4 corners). Rear Wing 10 pts Homemade camber apparatus for the front 5pts (iirc). Trans swap 25 pts. There is material points for various bits and pieces. It has an aluminum radiator and pulleys from an older generation of 60 degree v6 to allow the 8ntake to be turned around so the engine fits. I claim 10 pts for pulleys for that. As it sits, it's at 499pts. The seat, belts, nets are all less than 2 years old. Weight is somewhere in the 23xx range. Edited December 23, 2021 by wvumtnbkr 2 Quote Link to comment Share on other sites More sharing options...
wvumtnbkr Posted January 15, 2022 Author Report Share Posted January 15, 2022 Still for sale. Hit me up with questions. I'm not in a rush, and I do love this car, hut me up if your interested and I'll answer any questions. Quote Link to comment Share on other sites More sharing options...
mender Posted January 16, 2022 Report Share Posted January 16, 2022 (edited) I originally did this engine with reliability and efficiency in mind, if that helps. Professional high-end engine builder. For anyone not familiar with the GM 3500, think of it as a mini LS engine: great heads, stable valvetrain, not fragile, and undercammed. Edited January 16, 2022 by mender 1 Quote Link to comment Share on other sites More sharing options...
wvumtnbkr Posted May 11, 2022 Author Report Share Posted May 11, 2022 Still for sale! Finished 5th overall in the championship and 3rd overall on Sunday with a class win. Lemme know if you have questions. Quote Link to comment Share on other sites More sharing options...
wvumtnbkr Posted July 11 Author Report Share Posted July 11 Car is still for sale. Had a head gasket issue at cmp last month. Price drop for everything to $12k. Some parts / trailer negotiable if wanting to seperate. 1 Quote Link to comment Share on other sites More sharing options...
wvumtnbkr Posted July 29 Author Report Share Posted July 29 Okay, what's a good price? Quote Link to comment Share on other sites More sharing options...
wvumtnbkr Posted August 10 Author Report Share Posted August 10 Still available. Engine is being gone through and head gasket replaced. Will be a race ready setup in just a few weeks. Includes literally everything you need to go racing and run at / near the front of the pack. Hit me up! 7 too fore. 858 o67 five. Text is best. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.