Jump to content

BMW M52 OBD1 swap intake adapter | $100


Recommended Posts

This adapter plate makes for an easy OBD1 harness swap onto your M52, works great. From there use your favorite PnP engine computer solution, I have a LINK on my car. You'll also have to install a M50 valve cover and coils.

 

Originally, I was expecting to include plumbing for the IAC valve, but decided to try without first, see the blocking plate, it worked. The car is only a little finicky on cold start but entirely manageable with the throttle, then idles perfectly once a little heat gets into the engine. I did open the throttle plate a bit with the idle screw.

Included:

  • 6061 bullet aluminum adapter plate with IAC block off plate.
  • Vacuum line nipple.
  • 2x OBD1 fuel rail brackets.

Supply your own:

  • IAT sensor - OEM
  • Back side gasket/o-ring/seal - OEM
  • Mounting screws - OEM

 

$100 shipped

If there is broader interest, I'm willing to make more of these.

Kind regards,

Chris

20220528_095954.jpg

20220528_095833.jpg

20220326_160037.jpg

20220326_160010.jpg

20220320_164508.jpg

20220320_164437.jpg

20220320_163129.jpg

20220320_162456.jpg

20220320_162444.jpg

20220320_162429.jpg

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...