Jump to content

Brake pressure sensor on NA miata

Recommended Posts

For comparing when and how hard on the brakes, it won't matter where it is in the system.  It will just be a number that the system displays, you'll be looking for where on track and how hard the pedal is being pushed.


We've always just relied on monitoring the brake lights to provide a signal to the data logger.  It doesn't tell us how hard someone is pushing the pedal, but you can look at the rate of deacelartion and get a good idea.

Link to comment
Share on other sites

I’m running this on my NA:




Have a cheap eBay 1600psi pressure sensor running into my RaceCapture for data collection.  

We do use brake pressure as a primary signal to look at.  Says how early, and how hard you are getting on the brakes.  Also shows if you release/coast before turn in.  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...