Gearhead_42 Posted January 22, 2018 Report Share Posted January 22, 2018 Anybody have a clever/cheap alternate source for the "tabs" that hold up the filler plate inside the container opening? They install like a washer every 4th bolt or so. I have an ATL NASCAR cell and I have everything except those little tabs sorted... I've seen that FuelSafe has a cool setup using two brackets, anybody know if that's compatible with a NASCAR ATL pattern cell? Link to comment Share on other sites More sharing options...
jmabarone Posted January 22, 2018 Report Share Posted January 22, 2018 Not sure how you define cheap, but here's a spare gasket and all the necessary hardware: https://pitstopusa.com/i-7864910-atl-fill-plate-seal-kit-for-tf193-a-184-a-s-183-a-s-fill-plates.html Never hurts to have a spare gasket and bolts. That Fuel Safe style system looks pretty nifty, but I couldn't find one specifically priced. I think the 6"x10" gaskets are a standard size based on an aerospace gasket pattern, but don't quote me on that. Link to comment Share on other sites More sharing options...
Gearhead_42 Posted January 22, 2018 Author Report Share Posted January 22, 2018 Given the price on one of those gaskets, that's not a terrible price with all the included bits. Will keep that bookmarked. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.