Scribe Posted March 8 Report Share Posted March 8 Selling my 1980 Plymouth Fire Arrow that was originally prepared for SCCA ITB. I had purchased it a few years ago to race in Lemons/Champcar, but ultimately lost interest in it and started racing in Spec Miata. Unfortunately it spun a rod bearing at it's first test day and I haven't gotten around to repair it. I did have the engine out and it should be serviceable with new bearings and a polish on the crank. Engine parts are not too hard to find as the G54B engine was found in the Conquest/Starion as well as various Chrysler K cars. Otherwise ready to run on the track as it has a SCCA-spec cage, fresh rotors and Porterfield R4-E pads, and a set of 1 lap-old 15x8 wheels with RE-71's. Would need fire suppression, belts, and the included Kirkey seat to be re-mounted (original mount included) as I switched to an OMP HTE-R (not included). Specs: Engine: 2.6L G54B with custom header, upgraded carb, and Accusump Transmission: Mitsubishi 5-speed (can be swapped to Conquest/Starion 5-speed, need to convert to hydraulic clutch) Front Suspension: MacPherson with adjustable Koni shocks and spherical suspension joints Rear Suspension: Solid rear axle with custom adjustable leaf springs and upgraded shocks Brakes: Single piston calipers front and rear, front pads same as 72-78 RX-3 and 80-83 Corolla sedan, rear brakes same as Conquest/Starion Fuel: 12 gallon Jazz fuel cell and Holley fuel pump Weight: 2225lbs without driver Included spares are the aforementioned 15x8 Bassets and 205/50-R15 RE-71's, a box of oil filters, a fuel filter, spare carb, fuel pump, rear axle/hub, front control arm, front hub, front fenders Looking for $1500 OBO, car is located Canton, MI Photos:https://photos.app.goo.gl/RtWh2xS1G3vu4VKU6 Quote Link to comment Share on other sites More sharing options...
stvstb Posted May 18 Report Share Posted May 18 Is the Arrow still available? Quote Link to comment Share on other sites More sharing options...
Camaro67racer Posted May 18 Report Share Posted May 18 PM sent. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.